ForHosting KIT · Developer Utilities

Data rate unit converter

Internet plans, storage tools, and streaming specs mix megabits per second with megabytes per second, and they rarely spell out whether kilo means one thousand or one thousand twenty-four.

● BetaFree · in your browser

Run — free How it works & API

Use it from WebAPIEmailTelegramApp soon

Marketing copy says one hundred megabit broadband while download managers report megabytes per second; firmware and OS dashboards sometimes switch to kibibytes or mebibytes without warning. This data rate unit converter accepts a finite non-negative rate plus a source and target unit, scales everything through bits per second with either SI decimal prefixes or IEC binary prefixes, and returns a stable numeric result with labels that state which convention was used. It makes the bit-versus-byte distinction explicit: Mbps is megabits, MBps or MB/s is megabytes, and the eight-to-one relationship is applied only when you cross that boundary. The same pure logic powers the free browser widget and the API path, so homework checks, capacity planning scripts, and edge workers never disagree on a factor table that is otherwise easy to hard-code incorrectly.

How to use it

Enter your values in the form above. The tool checks them before calculating and shows the result on the same page.

Check your inputs

Use the labels and units shown next to each field. If something is missing or outside the allowed range, the page points to the field to fix.

Use it again or automate it

Use the browser tool for individual checks and the API when you need the same capability in an automated workflow.

What you can do with it

Get an answer now

Enter one set of values and see the result without building a spreadsheet or script.

Compare scenarios

Change one value at a time and rerun the calculation to understand what affects the result.

Automate repeated work

Use the API when the same calculation needs to run inside your product or workflow.

FAQ

How do I use this capability?

Complete the fields above and run it on this page. The form highlights anything that needs attention.

For developers — API access

Everything on this page is available programmatically. This section is for teams who want to wire it into their own systems; everyone else can just use the tool above.

API endpoint

POSThttps://api.kit.forhosting.com/dev/data-rate-convert

Prefer to automate it? One authenticated POST creates the task; the result comes back by webhook or a signed link. The same capability also runs here on the web, by email and from Telegram — and soon from our app too.

Call it from your stack

curl -X POST https://api.kit.forhosting.com/dev/data-rate-convert \
  -H "Authorization: Bearer $KIT_KEY" \
  -H "Content-Type: application/json" \
  -d '{"value":100,"from":"Mbps","to":"MBps"}'

const res = await fetch("https://api.kit.forhosting.com/dev/data-rate-convert", {
  method: "POST",
  headers: {
    "Authorization": `Bearer ${process.env.KIT_KEY}`,
    "Content-Type": "application/json"
  },
  body: JSON.stringify({
    "value": 100,
    "from": "Mbps",
    "to": "MBps"
  })
});
const { task_id } = await res.json();

import os, requests

res = requests.post(
    "https://api.kit.forhosting.com/dev/data-rate-convert",
    headers={"Authorization": f"Bearer {os.environ['KIT_KEY']}"},
    json={
    "value": 100,
    "from": "Mbps",
    "to": "MBps"
},
)
task_id = res.json()["task_id"]

<?php
$res = file_get_contents("https://api.kit.forhosting.com/dev/data-rate-convert", false, stream_context_create([
  "http" => [
    "method"  => "POST",
    "header"  => "Authorization: Bearer " . getenv("KIT_KEY") . "\r\nContent-Type: application/json",
    "content" => '{"value":100,"from":"Mbps","to":"MBps"}',
  ],
]));
$task = json_decode($res, true);

body := bytes.NewBufferString(`{"value":100,"from":"Mbps","to":"MBps"}`)
req, _ := http.NewRequest("POST", "https://api.kit.forhosting.com/dev/data-rate-convert", body)
req.Header.Set("Authorization", "Bearer "+os.Getenv("KIT_KEY"))
req.Header.Set("Content-Type", "application/json")
res, _ := http.DefaultClient.Do(req)

Example request

{
  "value": 100,
  "from": "Mbps",
  "to": "MBps"
}

Example response

{
  "task_id": "tsk_a1b2c3d4e5f6a1b2c3d4e5f6",
  "type": "dev.data_rate_convert",
  "status": "queued",
  "_links": {
    "result": "/tasks/tsk_…/result"
  }
}

The API is asynchronous: the call returns a task_id immediately and the result arrives by webhook. Polling is capped at 1 req/s per task.

Pricing

Per request$0.002

Published price — no tokens, no invented credits. A failed task is never charged.

Errors

HTTP	Code	Meaning
`401`	`unauthorized`	Missing or invalid API key.
`402`	`insufficient_balance`	Your balance doesn't cover the task price.
`404`	`unknown_type`	That task type doesn't exist.
`429`	`rate_limited`	Too many requests. Use the webhook instead of polling.

Read the full KIT documentation →